Easy SA

• MC-KB 330.01, low-cost operator panel 330 x 80 mm, IP65, with fixed legends to control your machines-tools equipped with a CNC or with a PLC. It includes 7 LED illuminated flat keys, 1 "mushroom" emergency switch, 1 Gray-coded 16 positions selector.
  

• MC-KB 330.02, low-cost operator panel 330 x 80 mm, IP65, with fixed legends to control your machines-tools equipped with a CNC or with a PLC. It includes 7 LED illuminated flat keys, 1 "mushroom" emergency switch, 1 Gray-coded 16 positions selector and 1 electronic handwheel of 100 pulses/rev.
  

• MC-KB 290, operator panel 290 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 45 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 4 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selectors, 1 box with cover for the RS232 connector, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB 290W, operator panel identical to the MC-KB 290 with protection cover for the push-buttons and keys.
  

• MC-KB 400, operator panel 400 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 45 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 9 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selectors, 1 box with cover for the RS232 connector, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB 520, operator panel 520 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 60 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 13 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selector, 1 box with cover for the RS232 connector, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB 520.02, low-cost operator panel 520 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 73 LED illuminated flat keys, 1 "mushroom" emergency switch, 2 key switches with different lock, 13 pulse or stepper illuminated push buttons, 2 Gray-coded 16 positions selectors, 1 connector for the external use of the inputs-outputs not used by the operator's panel.
  

• MC-KB RT, low-cost operator panel 200 x 200 mm, IP65, with areas for interchangeable legends and Fanuc IO Link interface to control your machines-tools equipped with Fanuc CNC. It includes 1 display 4 * 40 characters, 33 LED illuminated flat keys. The texts and the configuration are loaded by an RS232 serial line.

• MS-FC ST is a desktop version of the frequency converter for the controlling of the AC or DC motors (brushless and sensorless), used in the mircro-spindles for manual machining. Electric connections at the back
  Reaches 250W in continuous power and up to 500W in peak power.
  Speed adjustable between 5'000 and 99'000 rpm. Up to 100 sets of parameters.
  

• MS-FC LF is one of the model of the frequency converter which can be connected on machines-tools for the controlling of the AC or DC motors (brushless and sensorless), used in the mircro-spindles for manual machining. Electric connections at the back
  Fixing by the frontal plate
  Reaches 250W in continuous power and up to 500W in peak power.
  Speed adjustable between 5'000 and 99'000 rpm. Up to 100 sets of parameters.
  

• MS-FC LB is one of the model of the frequency converter which can be connected on machines-tools for the controlling of the AC or DC motors (brushless and sensorless), used in the mircro-spindles for manual machining. Electric connections at the back
  Fixing by the basic plate
  Reaches 250W in continuous power and up to 500W in peak power.
  Speed adjustable between 5'000 and 99'000 rpm. Up to 100 sets of parameters.
  

• MS-FC SW offers in complement to the MS-FC frequency converter the possibility of alternative control of 4 spindles with only one frequency converter.
  - Fixing by the basic plate
  - Electric connections at the front
  

Motion

• MC-SMC is an intelligent servo-amplifier for the controlling of step by step motors from simple 24V inputs-outputs with 4 positions free programmable, 2 positions controlled by sensors, adjustable speed and acceleration and the possibility to change the settings during operation. MC-SMC was especially developped to favourably replace some pneumatic or hydraulic systems in offering more flexibility and comfort.
  

• NCTEC, the workshop CAD/CAM, simple to use, with or without postprocessor and with all the tools for the programming of the CNC machines tools of turning and milling.
  

• DCom, a Windows software, simple and efficient for the management of CNC programmes with :
  

• DCom-kit, DCOM software with connection cables and adapters
  

• MC-PG 60, electronic hand wheel of 60 mm diameter, with a balls mechanism for an impulse by impulse feed. The electronic hand wheel generates two digital standard TTL (5 Vdc) signals, out of phase of 90° with a resolution of 100 pulses by turn.
  

• MC-PG 80, electronic hand wheel of 80 mm diameter, with a balls mechanism for an impulse by impulse feed. The electronic hand wheel generates two digital standard TTL (5 Vdc) signals, out of phase of 90° with a resolution of 100 pulses by turn.
  

• WIR 011, 25 poles m/f cable, 3 meter length
  

• WIR 023, 25 poles m/f cable, 4.5 meter length

• WIR 012, 25p m / 9p f adapter
  

• WIR 014, 25p m / 25p f adapter for Fanuc CNC
  

• WIR 015, 25p m / 25p f adapter for Siemens CNC